Kimex 164-5070 Manuel D'utilisation page 141

LCO
C2MSG
SETC2PROFILE
GETBOARDNAME
GETGYRO
LED Bar Color drive
Sends message
to UART2 (C2
connection)
The profile file name
of C2 is saved in
Aurora side.
Sends the board
name to C2 side
Sends the orientation
mode to C2 side
(The orientation
information comes
from gyro sensor to
rotate android display
automatically)
English - 56 -
string (red_green_blue_
white) (color level value as
string)
string
string (length_of_the_profile_
name/profile_name/END)
string (length_of_the_board_
name/board_name/END)
no parameter
#*FAILURE, lacking parameter!
#*FAILURE, parameter exceeds
the limit!
#*FAILURE, no parameter after '_'
character!
#*FAILURE, all colors are not
processed
#*SUCCESS
#*SUCCESS, Message Send: %s
#*FAILURE, lacking parameter!
#*FAILURE, parameter exceeds
the limit!
#*FAILURE, profile string is too
long!
#*FAILURE, profile string length is
not matching!
#*FAILURE, 'END' string could not
be captured correctly!
#*FAILURE, no parameter after '/'
character!
#*FAILURE, all parameters are not
processed
#*SUCCESS
#*SUCCESS, Board Name:
XXXXXXXXX
#*SUCCESS, GyroSensorStatus:
GYUG or GYRG or GYDG or
GYLG