Kimex 164-5070 Manuel D'utilisation page 104

If this option is set as Enabled, the Display will turn on with the HDMI1 input source,
when it is switched on. This feature works based on HDMI 5V signal. When this signal
is active the Display wakes up and when the signal is inactive the Display shuts down.
You can disable this option by setting as Disabled.
HDMI1 Wake Up
conjunction with the Auto Source Switch feature it is recommended to enable the
Auto Source Switch option in the Signage>Controls menu.
If any Scheduler is set this option will be inactive and can not be set as Enabled.
Note: This feature may not be available depending on the model of your unit.
If this option is set as Enabled, the Display will turn on with the active input source
(HDMI2, HDM3 or HDMI4 depending on which input source is active), when it is switched
on. This feature works based on HDMI 5V signal. When this signal is active the Display
wakes up and when the signal is inactive the Display shuts down. You can disable this
HDMI2, HDMI3,
option by setting as Disabled.
HDMI4 Wake Up
Auto Source Switch feature it is recommended to enable the Auto Source Switch
(optional)
option in the Signage>Controls menu.
If any Scheduler is set this option will be inactive and can not be set as Enabled.
Note: This feature or HDMI3 and HDMI4 options may not be available depending on the model of your
unit. If multiple devices are connected to the Display through HDMI input sockets, this feature will not work.
In order to use this feature in conjunction with the
English - 19 -
In order to use this feature in