SETBRIGHTNESS
GETSHARPNESS
SETSHARPNESS
GETCOLOUR
SETCOLOUR
SETSKINTONE
GETSKINTONE
PICTUREZOOM
GETPICTUREZOOM
SETHDMITRUEBLACK
GETHDMITRUEBLACK
SETDYNAMICCONTRAST Set dynamic contrast.
GETDYNAMICCONTRAST Get dynamic contrast. no parameter
SETFILMMODE
GETFILMMODE
Set picture brightness
value.
Get picture sharpness
value.
Set picture sharpness
value.
Get picture colour
value.
Set picture colour
value.
Set picture skin tone
value.
Get picture skin tone
value.
Set picture zoom
mode.
Get picture zoom
mode.
Set hdmi trueblack
status.
Get hdmi trueblack
status.
Set film mode.
Get film mode.
English - 46 -
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
int n (-5 ≤ n ≤ 5)
no parameter
str-int n (n = auto, 16:9,
subtitle, 14:9, 14:9zoom, 4:3,
full(only for HD channels),
cinema)
Customer Christie => ( n =
auto shows Overscan on
TV )
no parameter
str-int n (n = ON, n = OFF)
no parameter
str-int n (n = OFF, n = LOW,
n = MEDIUM, n = HIGH)
str-int n (n = OFF, n = AUTO)
no parameter
#*Picture brightness value is set
to n
or
#*Same value is set. Do nothing.
or
#*Incorrect parameter entered!
Value must be in the range 0-100
#*THE SHARPNESS VALUE : ...
#*Picture brightness value is set
to n
or
#*Same value is set. Do nothing.
or
#*Incorrect parameter entered!
Value must be in the range 0-100
#*THE COLOUR VALUE : ...
#*Picture colour value is set to n
or
#*Same value is set. Do nothing.
or
#*Incorrect parameter entered!
Value must be in the range 0-100
#*Picture skin tone value is set to n
or
#*Same value is set. Do nothing.
or
#*Incorrect parameter entered!
Value must be in the range -5-5
#*Picture skin tone is ...
#*setPictureZoomMode() set to n
or
#*Incorrect picture zoom mode
parameter entered
#*Picture zoommode is ...
#*HDMITrueBlack set to ON
or
#*HDMITrueBlack set to OFF
#*HDMITrueBlack is ...
#*Dynamic contrast set to n
or
#*Missing dynamic contrast state
#*Dynamic contrast is ...
#*FilmMode set to n
or
#*Missing film mode state
#*FilmMode is ...