Apps; Internet Browser - Kimex 164-5070 Manuel D'utilisation

Warning
Please make sure that below 3 parameters are not
configured this way at the same time; otherwise your
display may enter a reset loop on logo screen. In order
to get out of this loop, you should unplug the OPS unit
and change at least one of the 3 parameters.
1. Display: Menu > Settings > Signage > Power Up
Settings > Power Up Mode = STANDBY
2. Display: Menu > Settings > Signage > Power Up
Settings > Quick Standby = DISABLED
(*) If the ERP Regulations 2021 are applied (depends
on the model of the unit): Menu > Settings > Signage
> Power Up Settings > Power Mode = ECO
3. OPS: BIOS Menu > Chipset > State After G3 >
S0 STATE

Apps

You can access the applications installed on your
Display from Apps menu. Highlight an app and press
OK to launch.
In order to open the Start url that is defined the in
Settings>Signage>Link Options menu highlight the
Custom App option and press OK.
Notes:
Possible application dependent problems may be caused by
the content service provider.
Third party internet services may change, be discontinued or
restricted at any time.
Using Audio Video Sharing
Network Service (optional)
Audio Video Sharing feature uses a standard that eases
the viewing process of digital electronics and makes
them more convenient to use on a home network.
This standard allows you to view and play photos, music
and videos stored on your media server connected to
your home network.
1. Server Software Installation
The Audio Video Sharing feature cannot be used if the
server programme is not installed onto your PC or if
the required media server software is not installed
onto the companion device. Please prepare your PC
with a proper server programme.
2. Connect to a Wired or Wireless Network
See the Wired/Wireless Connectivity chapters for
detailed configuration information.
3. Enable Audio Video Sharing
Enter the Settings>System>More menu and
enable the Audio Video Sharing option.
4. Play Shared Files via Media Browser
Highlight the Audio Video Sharing option in the
Sources menu by using the directional buttons and
press OK. Available media server devices in the
network will be listed. Select one and press OK to
continue. The media browser will then be displayed.
Refer to the Media Browser Menu section for further
information on file playback.
If a problem occurs with the network, please switch
your display off at the wall socket and back on again.
Trick mode and jump are not supported with the Audio
Video Sharing feature.
PC/HDD/Media Player or any other devices that are
compatible should be used for higher playback quality.
Note: There may be some PC's which may not be able to
utilise the Audio Video Sharing feature due to administrator
and security settings (such as business PC's).

Internet Browser

To use the internet browser enter the Apps menu first.
Then launch the internet browser application which
has an orange coloured logo with earth symbol on it.
(*) The appearance of the internet browser logo may change
In the initial screen of the browser, the thumbnails of
the predefined (if any) links to web sites available will
be displayed as Speed Dial options along with the
Edit Speed Dial and the Add to Speed Dial options.
You can press the Internet button on the remote to open
the initial internet browser page. If the Open browser
initial page URL in the Settings>Signage>Link
Options menu is defined, the browser will open on
this page. Otherwise this button will not be functional.
To navigate the web browser, use the directional
buttons on the remote or a connected mouse. To see
the browser options bar, move the cursor to the top of
the page. History, Tabs and Bookmarks options and
the browser bar which contains previous/next buttons,
the refresh button, the adress/search bar, the Speed
Dial and the Vewd buttons are available.
To add a desired website to the Speed Dial list for
quick access, move the cursor to the top of the page.
The browser bar will appear. Highlight the Speed Dial
- button and press the OK button. Then select Add
to Speed Dial option and press the OK button. Fill in
the blanks for Name and Address, highlight OK and
press the OK button to add. Whilst you are on the site
you wish to add to the Speed Dial list, highlight the
Vewd button and press the OK button. Then highlight
Add to Speed Dial option in the submenu and press
the OK button again. Name and Address will be filled
automatically according to the site you are visiting.
Highlight OK and press the OK button to add.
You can also use the Vewd menu options to manage
the browser. Highlight the Vewd button and press
the OK button to see available page specific and
general options.
There are various ways to search or visit websites
using the web browser.
English - 26 -