DKN technology EB-3100 Mode D'emploi page 29

Operating Instructions Computer
Switch on
Start pedaling, and when reachin +/- 15 rpm, the
display will be blinking for some seconds showing the
figure 78, while running selftest mode as shown
below.
U1 blinks:
Set USER
Preset personal data (AGE, WEIGHT, HEIGHT,
SEX) by using up-down, and press MODE for
confirmation.
Select MANUAL, PROGRAM, H.R.C., USER, WATT,
by using up-down, or press START for quick start.
Function buttons
MODE Press to select any function to be
displayed on the main screen.
ST/STOP To start or stop the exercise
program.
RECOVERY Press this button for recovery
function: After exercising, while the
LCD is still active, press recovery
button, and hold both sensors (or
wear the chest transmitter) The
computer will run a time down for 60
seconds, after which your recovery
rate will be displayed, grades 1 up to
6. Level 1 featuring fast recovery,
level 6 slow recovery.
To clear the display and reset all
RESET
data.
UP To select upward function.
DOWN To select downward function