TFA 98.1023 Mode D'emploi page 6

TFA Anleitung No. 98.1023 06.11.2006 15:14 Uhr Seite 6
Display Mode
• In normal mode the upper row shows the time in hours,
minutes and seconds, the middle row the alarm time, the
weekday and the alarm symbol (in case), and the lower
row the temperature and the week number.
• To view the calendar for 30 seconds, press MODE button
Alarm on and off
• To activate alarm function press and hold the ALARM
ON/OFF button until the alarm symbol appears on the
middle row of the display. To turn off the alarm function,
press and hold the ALARM ON/OFF button again until the
alarm symbol disappears.
Alarm stop/snooze function
• When the alarm starts to ring, you can activate the snooze
function by pressing the SNOOZE button. The alarm will be
interrupted for 8 minutes. If snooze function is not desired
press any other button to stop the alarm.
11 12
12 hour or 24 hour time system
• In normal mode choose 12 HR or 24 HR system by pressing
the UP button. In 12HR format, PM will appear top right
on the display indicating PM hours.
°C °F-switch
• By pressing the DOWN button in normal mode the tempe-
rature unit can be changed from °C to °F.
Timer
• Press MODE button twice in normal mode to enter timer
mode. The upper row shows 00:00:00.
• Press DOWN button to recall the last saved value (default
30 minutes). Press DOWN button again to reset to
00:00:00.
• To set the timer value press the SET button. The hour
digits are flashing. Use the UP and DOWN buttons to set
the desired hour. Press MODE button and set the minutes
similarly. Confirm the setting by the SET button.
• Press UP button to start and stop the countdown.