Axis Communications Q3505-SVE Mk II Guide D'installation page 20

AXIS Q3505-SVE Mk II Network Camera
8. Wind up the cable slack along the mounting bracket and attach the unit casing to the
mounting bracket with the two screws.
9. Verify that the cable gaskets are correctly mounted against the unit casing and the cables.
Adjust the camera angle
1
Lines on optic holder that indicate an increment in the tilt angle by 10°
2
Small lines on optic mount that indicate a pan increment of 3°
3
Lines on optic mount that indicate a pan increment of 15°
4
Lines on lens cover to help ensure camera is level
1. Pan, tilt and rotate the camera to cover the area under surveillance. It is possible to pan
360°, and tilt to an angle of 90°.
2. Pan and rotate the lens to adjust the image.
3. Use the two lines on the lens cover to ensure that the camera is level. To activate the
leveling assistant, press the function button. See Function Button on page 14.
20