Axis Communications Q3505-SVE Mk II Guide D'installation page 13

2
Control button
3
I/O connector
4
Audio in connector
5
Audio out connector
6
SD card slot
7
Status LED
8 Function button
9
Not used
LED Indicators
Note
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED
Unlit
Green
Amber
Amber/Red
Status LED behavior and buzzer signal for leveling assistant
For information on the function button used for leveling the image, see page 14.
Color
Fixed green
Flashing green
Flashing orange
Flashing red
SD card slot
NO TICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when
inserting or removing the SD card. Use your fingers to insert and remove the card.
AXIS Q3505-SVE Mk II Network Camera
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after
startup completed.
Steady during startup. Flashes during firmware upgrade or reset
to factory default.
Flashes amber/red if network connection is unavailable or lost.
Buzzer
Continuous beep
Fast beeps
Medium beeps
Slow beeps
Camera position
Level
Almost level
Not level
Far from level
13
EN