Assembly - CERTIFIED 060-1918-8 Guide D'utilisation

ASSEMBLY

WARNING
Always ensure that the lawn mower is switched off and the plug is removed from the
power source before making any adjustments or performing maintenance tasks.
WARNING
Read and follow the assembly and adjustment instructions for your lawn mower. All
fasteners are in the parts bag. Do not discard any parts or material until the unit is
assembled.
When assembling the lawn mower, refer to the illustration on the front cover and the ones here
(Figs. 4a, 4b, 4c and 5a, 5b) to aid in the assembly.
Attach the handle.
1. Slide the two height adjust fixing blocks
onto the ends of the lower handle. (Fig. 4a)
2. Insert the quick-release lock bolt into the
tube and handle seat①. Screw the bolt in
and clamp it to fix the lower handle②. The
handle height can be adjusted at three
positions (L, M and H) by rotating the height
adjust fixing block; make sure the arrow is
aligned with same position on both height
adjust fixing blocks to choose the handle
height level you want. (Fig. 4a)
3. Attach upper handle to lower handle with
fixing knob. Be sure the cord holder be
getting through the upper handle before
insert the fixing knob, then tighten by hand.
(Fig. 4b, 4c)
Fig. 4a
②
①
L
M
H
Fig. 4b
15
①
②