Storing And Maintenance - CERTIFIED 060-1918-8 Guide D'utilisation

22
model no. 060-1918-8 丨060-1919-6

STORING AND MAINTENANCE

WARNING: Before performing any maintenance or cleaning work, always pull out the mains
plug!
1. Do not spray the unit with water. Contact with water may damage the switch/plug
combination unit and the electric motor.
2. Clean the unit with a cloth, hand brush, etc.
Inspection is required:
a) If the lawn mower strikes an object.
b) If the motor stops suddenly.
c) If the blade is bent (do not align!)
d) If the motor shaft is bent (do not align!)
e) If a short-circuit occurs when the lawn mower is plugged in.
f) If the gears are damaged.
Always have the mowing blade re-sharpened or replaced at an authorized repair facility.
Unbalanced blades will cause the lawn mower to vibrate excessively.
Cleaning
General cleaning
The lawnmower should be cleaned thoroughly every time after it has been used.
Always clean your lawnmower immediately after use.
Do not allow grass cuttings and other debris to become dry and hard on any of the mower
surfaces.
Dried grass remnants and dirt may impair the mowing operation.
Check that the grass chute is free of any residual grass. Remove any such residue.
Check the underside of the lawnmower and the blade mount.
I
contact us 1-844-428-7277