Table Des Matières; Safety - Sievert TW 5000 Mode D'emploi

PLEASE READ OPERATORS MANUAL CAREFULLY BEFORE USE AND
KEEP FOR FURTHER REFERENCE.
WARNING! To reduce the risk of electric shock, do not expose this product to
rain or moisture. Store indoors. Read operators manual before using.
When servicing use only Sievert identical replacement parts.
WARNING
▪ DANGER! Always unplug any electronic tool
before opening it as live components and
connections are exposed.
▪ Improper use of the TW 5000 hot-air welding
machine could cause fire and/or an explosion
hazard.
▪ Never operate electronic equipment near com-
bustible materials and/or explosive gases.
▪ Touching the element housing and/or nozzle
during or after operation could cause burns.
▪ CAUTION! Element housing and/or nozzle have
hot surfaces.
Allow the hot-air welding machine to cool down.
▪
▪ Do not point the hot-air flow at people or animals.
SAFETY................................................... 2
PRODUCT DESCRIPTION.................. 3-4
ASSEMBLY............................................. 5
OPERATION........................................ 6-8
MAINTENANCE................................... 8-9
!

SAFETY

TABLE OF CONTENTS
GB
CAUTION
▪ The voltage rating stated on the hot-air welding
machine should correspond to the mains voltage.
▪ For personal protection, we strongly recommend
the TW 5000 hot-air welding machine be
connected to an RCCB (Residual Current
Circuit Breaker) before using it on any type of
application.
▪ The TW 5000 hot-air welding machine must be
operated under strict supervision.
▪ The heat can ignite flammable materials which
are not in view.
▪ Protect the TW 5000 hot-air welding machine from
any and all standing water, rain and dampness.
TROUBLESHOOTING GUIDE................ 10
SERVICE AND REPAIR.......................... 10
ACCESSORIES & SPARE PARTS......... 11
TW 5000 OVERVIEW......................... 12-13
- 2 -
!