Home Connect™ System - Thermador DWHD771W Serie Mode D'emploi

Home Connect™ System
This dishwasher is Wi-Fi capable and can be remotely
controlled via a mobile device.
If your dishwasher does not connect to the home
network, you can also operate the dishwasher manually
by pressing the buttons.
Refer to appliance overview for the location of the
buttons. ~ "Appliance overview" on page 8
Wi-Fi |
You can activate wireless network connection with
: or deactivate it with
'Ÿ ‹‚
Activate Wi-Fi:
Press the on ON/OFF button
1.
Press and hold the button
2.
In the display window
Press the button
‹
3.
appears in the display window
Use the setting button +
4.
Press and hold the button
5.
The chosen setting has now been stored in your
dishwasher.
Note: Remote control of the dishwasher requires a
stable wireless network connection.
Network login
To connect the dishwasher to your home network, you
can choose between automatic
login . To do this, check to see if there is a WPS
†'
function on your router.
Automatic network login
network using the WPS function of your router. During
connection press the WPS button on the router.
Manual network login †'
to the network (SSID):__________, password (key):
__________. The network settings are then manually
entered using the Home Connect App to connect to your
home network.
Connect dishwasher to home network and app:
Switch on ON/OFF switch
1.
Press and hold the button
2.
In the display window
Press the button
‹
3.
†' appears in the display window.
Start connection with the setting button +
4.
In the display window
Following successful connection to your home network
: appears briefly in the display window
™ ©Ÿ
The dishwasher then automatically starts connection to
the app. During connection
window .Following successful connection to the app
H
: appears in the display window
™ ©Ÿ
Observe the Home Connect documents supplied.
: .
'Ÿ ‹‹
.
(
for 3 seconds.
‹
H you will see • : ‹ ... and
repeatedly until :
'Ÿ ‹‹
.
H
to activate Wi-Fi
P
‹ for 3 seconds.
and manual network
''
'' : Connect to the home
: Connect your mobile device
.
(
‹ for 3 seconds.
you will see : ... and
H • ‹
repeatedly until
H ''
P
you will see .
H ˜'
H
: appears in the display
'˜ ˜
.
H
Note: The menu items
Wi-Fi has been activated.
Connect to the app
The setting
dishwasher, app and your user account.
Note: This step should only be carried out if the
dishwasher has not yet automatically connected to the
app.
Connect dishwasher to app:
Switch on ON/OFF switch
1.
Press and hold the button
2.
In the display window
Press the button
3.
' .
appears in the display window
Start connection with the setting button +
4.
If connection is successful,
: .
'Ÿ ‹‚
window
H
Observe the Home Connect documents supplied.
Note: The menu item
a connection to the home network.
About data protection:
When your Home Connect dishwasher is connected for
the first time to a WLAN network which is connected to
the Internet, your Home Connect dishwasher transmits
the following categories of data to the Home Connect
server (initial registration):
Unique appliance identification (consisting of
▯
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication module
▯
(to ensure a secure IT connection).
The current software and hardware version of your
▯
dishwasher.
Status of any previous resetting to factory settings.
▯
This initial registration prepares the Home Connect
functions for use and is activated the first time you use
these Home Connect functions. Please note that the
Home Connect functions can be used only in conjunction
with the Home Connect App. Information on data
protection can be accessed in the Home Connect App.
.
'
Remote start button
or
If the dishwasher is connected to the home network, you
.
can activate the dishwasher's remote control.To do so,
press the remote start button
If the dishwasher has not yet logged into Home Connect,
perform automatic network login
.
remote start button
Observe the Home Connect documents supplied.
Notes
To remotely control the dishwasher, the remote start
▯
button
`
and are not available until
'' †'
: establishes the link between the
'˜ ˜
( .
‹
you will see
H
repeatedly until
‹
H
™ : ©Ÿ appears in the display
.
'˜ : ˜ is not available until there is
.
`
''
.
`
must be activated.
for 3 seconds.
: ... and .
• ‹ '
:
'˜ ˜
.
.
P
by pressing the
11