Installing The Unit - Rotel U790CH1 Mode D'emploi

Installing the unit

o Move the machine with installed exhaust pipe and fittings to-
wards the window. Distance between the unit and adjacent
walls or other objects shall be least 50 cm (as shown in Fig. 4).
Notes:
o The flat end of the exhaust pipe joints must be snapped into
place.
o The pipe cannot be distorted nor has substantial bend (greater
than 45 °). Keep the ventilation of the exhaust pipe unob-
structed.
o Elongate the exhaust pipe and snap the flat end of it into the elliptical hole of the win-
dow sealing plate (as shown in Figure 5 and 6).
Figure 5
Caution:
o The length of the exhaust pipe shall be 280~1,500 mm, and this length is based on the
specifications of this air conditioner. Do not use extension tubes or replace it with a
different pipe, as this may cause a malfunction.
o Exhaust must be unobstructed; otherwise it may cause overheating.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Figure 6
51
Figure 4