Troubleshooting - Walimex Pro Power Station GX Mode D'emploi

9. Troubleshooting

Problem
The Power Station GX
is switched on, but
does not show any
function
The Power Station GX
is switched on, char-
ged, but does not show
any function
Power Station – does
not function reliably
The display of the bat-
tery charge condition
only lights very dim
42
Possible cause
The Power Station GX
is not or only insuffi-
ciently charged
100A fuse defective
The contact pins of
the upper device unit
do not contact the
powerpack.
The Power Station GX
is defective
The switch for the cor-
responding operation
has not been set
Power Station GX is
not or only insufficiently
charged
Remedy
Recharge the Power
Station GX. Replace
the powerpack.
Have the fuse replaced
by a skilled electrician.
(Before replacing:
Interrupt the power
supply by disconnec-
ting the control unit
from the battery)
Turn the upper device
unit around on the
powerpack
Consult the customer
service of Foto Walser
Set the switch to
Normal/Continuous
operation or Flash fun-
ction (flash operation),
as required
Recharge the Power
Station GX