Walimex Pro Power Station GX Mode D'emploi page 31

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Danger of short circuit, electric shock when changing the polarity in
connection with other power supply units – persons or equipment
may be endangered.
■ Always take the device out of its transport bag before taking into service,
assembly or repair measures.
■ Switch off the device (Power Station and the other power supply unit)
before starting assembly work.
■ Use only the prescribed connecting cables.
■ Ensure correct polarity between Power Station GX and the other power
supply unit PLUS (+) to PLUS (+), MINUS (-) to MINUS (-).
■ Ensure tight and secure connection of cables between the power supply
units.
■ Ensure tight fit of the cables on terminal and plug connections of the
individual poles before use. Any contact between the individual poles
PLUS-MINUS (+/-) must be ruled out.
■ Make sure the device are standing reliably and no persons will stumble
over the cables.
■ After use isolate the power supply units by disconnecting the connecting
cables.
■ We will not assume liability for damage to persons or material.
WARNING
Danger of suffocation caused by small parts
Keep the device out of the reach of children and pets.
31

Publicité

Table des Matières
loading

Table des Matières