NOTE
Make sure that all powerpack holding clips have properly clicked into place.
If the Power Station does not show any function, turn the upper device unit
around on the powerpack (see attaching / removing the powerpack to /
form the Power Station).
Charging with the power supply unit
• Connect the power supply unit to the power supply by using the mains
cable and plug the charging cable into the jack on the Power Station.
NOTE
Compare the local electric power supply with the connection values of
the device. Should the connection values not match, please contact
info@walimexpro.de or phone +49 8432-9489-0.
• The charge indicator on the power supply unit lights red.
• As soon as the Power Station GX is fully charged, the charge indicator on
the power supply unit will light green.
NOTE
No equipment should be operated during the recharging process.
Status display LED power supply unit
recharging process
LED flickering red
LED lights red
LED lights green
Status
No charging
Device is being charged
Charging process finished
37