Function Of The Indicators; Description Of The Lcd Displays - Dini Argeo BCSD Serie Manuel Opérateur

4.2 FUNCTION OF THE INDICATORS

INDICATOR
CHARGE

5. DESCRIPTION OF THE LCD DISPLAYS

WEIGHT DISPLAY
The weight on the plate is shown in this display.
UNIT WEIGHT DISPLAY
The entered or calculated average piece weight is shown in this display.
COUNT DISPLAY
The current number of pieces is shown in this display.
FUNCTION OF THE SYMBOLS
- If pressed for an instant it allows entering in the management or
selection of the articles.
- If pressed for an instant it allows to set the thresholds for the
QUANTITY CHECK function (see section 6.9).
- Selection of active scale (see section 6.2).
- Allows executing the reference operation (see section 6.7).
- Allows to quickly enter the average piece weight (see section 6.7).
- Secondary function for selecting the current unit of measure, if enabled
(see section 6.3).
- Allows clearing the average piece weight (section 6.7).
- In the numeric input phase, it quickly zeros the current value.
- Entry of digits or characters (see section 6.10)
Indicates that the battery is going to recharge (see section 3.3).
7
FUNCTION