Power Supply And Start-Up; Battery Powered; Front Panel Keys And Indicators; Function Of The Keys - Dini Argeo BCSD Serie Manuel Opérateur

EXC -
SENS +
SENS -
SIG +
SIG -

3.2 POWER SUPPLY AND START-UP

The indicator can be powered with a fitted 240 Vac external power adapter or just with the fitted battery.
NOTE: it is advisable to completely recharge the battery (12 hours) with the first installation of the instrument.
TO POWER the instrument through the 240 Vac mains put the AC/DC power plug in the appropriate socket under the
scale and the power adapter in the 240 Vac mains socket.
TO TURN ON the instrument press the ON/OFF key under the scale and release it.
TO TURN OFF the instrument press upwards the button under the scale until it turns off; then release it.

3.3 BATTERY POWERED

The weighing indicator can be operated from the battery if desired.
When the battery needs charging the
when the symbol is on. The scale will still operate for about 10 minutes after which it will automatically switch off to protect
the battery.
To charge the battery simply plug into the mains power. The scale does not need to be turned on.
The battery should be charged for 12 hours for full capacity.
You can find the "Charge" LED at the right of display to indicate the status of battery charging. When the scale is
plugged into the mains power the internal battery will be charged. If the LED is green the battery has a full charge. If it is
Red the battery is nearly discharged and yellow indicates the battery is being charged.
As the battery is used it may fail to hold a full charge. If the battery life becomes unacceptable then contact your distributor

4. FRONT PANEL KEYS AND INDICATORS

4.1 FUNCTION OF THE KEYS

4,5
1,2
4,5
8
7
symbol on the weight display will turn on. The battery should be charged
- Clears the displayed gross weight if it's within the configured
percentage (see section 7.6) of the total capacity.
- A secondary function of "Enter" key when setting parameters or other
functions.
- If pressed for an instant it executes the semiautomatic tare;
- A secondary function of incrementing the active digit when setting a
value for parameters or other functions.
- If pressed for an instant it adds the value to the accumulation memory if
the accumulation function is not automatic.
6
EXCITATION -
REFERENCE +
REFERENCE -
SIGNAL +
SIGNAL -