Axis Communications P13-E Serie Guide D'installation page 15

Specifications
Operating Conditions
Products
AXIS P1353–E
AXIS P1354–E
AXIS P1355–E
AXIS P1357–E
Power Consumption
Product
AXIS P1353–E
AXIS P1354–E
AXIS P1355–E
AXIS P1357–E
Connectors
I/O Connector
4-pin terminal block for:
• Auxiliary power (DC output)
• Digital Input
• Digital Output
• 0 V DC (-)
Note
The I/O connector is connected to the housing (fan/heater) on delivery. In the case of a fan
or heater error, an input signal will be triggered in the camera. Set up an action rule in the
camera to configure which action the signal shall trigger. For information about events and
action rules, see the User Manual available on www.axis.com
Function Pin
1
0 V DC (-)
2
DC output
AXIS P13-E Network Camera Series
Temperature
-30 ºC to 50 ºC
(-22 ºF to 122 ºF) with PoE,
down to -40 ºC (-40 ºF) with High PoE
PoE
12.95 W
IEEE 802.3af/802.3at Type 1 Class 3
Notes
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
High PoE
25.5 W
1
15
Humidity
10 - 100% RH (condens-
ing)
Specifications
0 V DC
3.3 V DC
Max load = 50 mA