Usage Conditions; Working Area; Electrical Safety; Personal Safety - ENAR TORNADO Serie Manuel D'instructions

3.

USAGE CONDITIONS

WARNING!

3.1 WORKING AREA

KEEP your working area clean and well lit. Cluttered benches and dark areas invite accidents.
DO NOT OPERATE power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
KEEP AWAY from standers, children, and visitors while operating a power tool. Distractions can cause
to loose control.

3.2 ELECTRICAL SAFETY

GROUNDED TOOLS MUST BE PLUGGED INTO an outlet properly installed and grounded in
accordance with all codes and ordinances.
NEVER REMOVE the grounding prong or modify the plug in any away.
DO NOT USE any plug adaptor.
CHECK with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
AVOID body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
DO NOT EXPOSE power tools to rain or wet conditions.
DO NOT ABUSE the cord.
NEVER USE the cord to carry the tools or the plug from an outlet.
KEEP cord away from heat, oil, sharp edges or moving parts.
REPLACE damaged cords immediately. Damaged cords increase the risk of electric shock.
WHEN OPERATING a power tool outside, use an outdoor extension cord marked "W-A", "W" or
"H07RN-F". DO NOT work with the machine if any of the cables are damaged.
DO NOT work with the machine if it damages the switch and / or the junction box.
In the event of detecting any electrical damage to the machine, contact ENARCO technical service
or an authorized dealer.

3.3 PERSONAL SAFETY

STAY ALERT, watch what you are doing and use common sense when operating a power tool.
DO NOT USE THE TOOL while tired or under the influence of drugs, alcohol, or medication.
DRESS properly.
DO NOT WEAR loose clothing or jewellery.
CONTAIN long hair.
KEEP your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair
can be caught in moving parts.
AVOID accidental starting.
BE SURE switch is off before plugging in. Carrying tools with your finger on the switch or plugging in
tools that have the switch on invites accidents.
REMOVE adjusting keys before turning the tool on.
DO NOT overreach.
KEEP properly fed and balanced at all times.
USE safety equipment.
ALWAYS WEAR eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.

3.4 TOOL USE AND CARE

USE clamps or other practical way to secure and support the work piece to a stable platform.
DO NOT FORCE the tool.
ELECTRIC AND PETROL VIBRATING SCREEDS "TORNADO" TYPE
READ AND UNDERSTAND EVERY INSTRUCTION
en
5