Muller Light 404013 Mode D'emploi page 63

• Think beforehand about which bulbs you want to group together and
try to make the groups logical and comprehensible. This means you
will be able to use the groups later using the group button quickly
and without having to waste time testing them.
Using the group button
• The first time the group button is pressed, the LEDs above it will
show which group you are in.
• Pressing it again will advance you one group.
• You are in the next group when the following LED above the group
button lights up:
° LED 1 for the first group
° LED 2 for the second group
° LED 3 for the third group
° LED 1, 2 and 3 for all groups
Adding a new bulb
• Take note of the technical specifications when purchasing new bulbs.
We recommend tint bulbs from Müller-Licht. When using bulbs
made by other manufacturers, it is not guaranteed that all features
will be supported or will work as intended.
tint-STARTER SET
INSTRUCTION MANUAL
63