Setup; Fitting The Bulbs - Muller Light 404013 Mode D'emploi

15 Battery compart-
ment for 2 batteries
LR03 (AAA)

Setup

Fitting the bulbs

You can insert the two supplied bulbs into different fit-
tings, e.g. into a ceiling light and a free-standing lamp or
a desk lamp. The only requirement is that the lights each
have a suitable E27 socket.
1. Switch lamps off and unplug them from the mains (where
applicable) and/or switch off the fuse for the room at the
fuse box.
2. Allow previously inserted bulbs to cool when necessary.
3. Remove the old bulbs and screw the new bulbs into the
sockets.
4. Plug the lamp back in at the mains and/or switch the house
fuse back on and set the switch to I or ON.
tint-STARTER SET
INSTRUCTION MANUAL
57
14 Reset button