Hendi 227077 Mode D'emploi page 7

5). Steam function
• Press and hold the steam switch if you want to
add steam inside the appliance.
• Please make sure the water pipe is connected &
the timer is set.
Tips for cooking
• Check the recipe first for the Timer control and
Temp control setting.
• Ensure there is enough space between the food
for the heat to be evenly distributed.
Timer knob
Timer indicator
light
RESET with the SAFETY CUT-OUT
Please note that there is a SAFETY CUT-OUT device
for protection located at the lower rear side of the
appliance with a protective cap. This is to turn off
the appliance automatically when the temperature
is too high.
• Unplug the appliance from the electrical outlet
first.
Cleaning and Maintenance
Warning!
• Always disconnect the appliance and open the
door to allow it to cool down completely before
cleaning.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
• Steam indicator will light on.
• Release the steam switch button if do not use it.
• Cooked food and parts of the appliance get very
hot for some time after cooking. Do not touch
them with bare hands while in use or shortly af-
ter use.
Steam Steam
switch indicator
• Allow the appliance to completely cool down.
• Unscrew (tool not supplied) the black protective
cap of the "SAFETY CUT-OUT".
• Push the button to RE-SET the overload circuit.
You should hear a click sound.
• Screw back the protective cap on the "SAFETY
CUT-OUT" button.
• Avoid the use of sprays as this may damage the
appliance's surface.
• The appliance should be cleaned regularly and
any food deposits removed.
• Wipe out any remaining oil or fat.
• Note: The trays holder on two sides can be un-
screwed (tools not supplied) to detach for cleaning.
Handle
Wire rack mounts
Fan
50
Temperature
100
MAX
125
control knob
275
150
250
175
225 200
Temperature
light
EN
7