UPnP
My Playlist
Clear My Playlist
USB Playback
Streaming & App Operation
IR-110 is the default device name for DLNA, and you may rename it as you like. The information below is the
introduction of how to setup up media streaming from PC or other media server. Study the own instruction
of the software or apps you use to enjoy music streaming if necessary. Make sure the music files are in the
format of MP3, WMA or WAV for music streaming to the IR-110.
UPnP
To enjoy the streaming music from PC, the following steps are to be done on the PC:
•
Connect the PC to the network.
•
Ensure the IR-110 is powered on and connected to the same network.
•
Open the UPnP platform Windows Media Player (11 or later). Alternatively, other platforms or server
such as Windows Media Connection may be used.
•
Allow to share your media to IR-110.
•
Add the audio files and folders you want to share with IR-110 to the media library.
You may also enjoy the streaming music from other music server, such as smart phone (Android platform):
•
Connect the mobile to the network
•
Search and install media sharing apps from Google Play.
•
Add the audio files from your mobile you want to share.
•
After setup the shared server, choose the music and control playback on the IR-110.
20
Media Center
If you have set up shared media, you should see the shared media from UPnP.
If you have more than one computer sharing media, the alternatives are listed.
Select the shared media you want to play. Use Play/Pause, Next/Prev and Stop
Press Info to view the display information of the playing track.
Hints: The radio can only read the track with the file name less than 40 charac-
ters. The characters should be in European language. If you encounter failure of
reading the track under UPnP mode, you may try to rename the file. However, if
the track is still unable to play, you can try converting the file to different formats.
You can create a playlist of favourious music from UPnP. When you playing the
music, press and hold Select to save it into My Playlist.
You can remove all the saved music under My Playlist.
From this point on, menus are generated from the folders on the USB device.
Browse folders with the NAV wheel or direction keys on the remote control. The
display shows folder and file names (not necessarily track names).
Once you have found a track you want to play, press the navigate reel on the
device or press OK on the remote control.
Note: The USB port does not support charging or data transfer with a computer.