Options And Accessories - Hatco HDWTC-2 Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
3" (76 mm) Locking Casters
3" (76 mm) locking casters are available for the one, two, and
three-drawer freestanding units in place of the legs. Add 3/16"
(4 mm) to Height (C) in Dimensions section. Use the following
procedure to install casters onto the bottom of the unit.
NOTICE
Do not lay unit on the front or back side or damage to the
unit could occur.
1. Remove any pans from the drawers of the unit.
2. Carefully lay the unit on its left or right side (requires two
people).
3. Remove the legs, if installed.
4. Install the caster into a hole where a leg was removed.
Tighten securely.
Installing 3" (76 mm) Casters
5. Repeat steps 3 and 4 for the remaining three casters.
6. Return the unit to the upright position (requires two
people).
2" (51 mm) Locking Casters
2" (51 mm) diameter locking casters are available for one, two,
and three drawer freestanding units. Subtract 1-1/2" (37 mm)
from Height (C) in Dimensions section.
4" (102 mm) Locking Casters
4" (102 mm) diameter locking casters are available for one,
two, and three drawer freestanding units.
5" (127 mm) Locking Casters
5" (127 mm) diameter locking casters are available for one,
two, and three drawer freestanding units.
6" (152 mm) Adjustable Legs
6" (152 mm) stainless steel adjustable legs are available for
one, two, and three drawer freestanding units.
6" (152 mm) Plastic Legs
6" (152 mm) plastic legs are available for one, two, and three
drawer freestanding units.
Trivet
A trivet (HDW-TRIVET) raises food product 1/2" (51 mm) off of
the bottom of a full size food pan.
Form No. HDWTCM-0121
3" (76 mm) Caster
11

OPTIONS AND ACCESSORIES

Food Pans
Accessory stainless steel food pans are available in various
sizes.
OS-PAN ..................Oversized stainless steel pan at 5"
(127 mm) deep — 15"W x 20"D x
5" deep (381 x 508 x 127 mm)
HDW 6" PAN ..........Full size stainless steel pan at 6" (152 mm)
deep — 12-3/4"W x 20-3/4"D x 6" deep
(324 x 527 x 152 mm)

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Hdwtc-1Hdwtc-3Hdwtc série

Table des Matières