Connections - Fbt Archon Serie Mode D'emploi

CONNECTIONS

The ARCHON series 105 / 106 / 108 models can be setup in constant impedance or constant voltage mode thanks to an
optional line transformer.
CONSTANT VOLTAGE LINE
Connect a conductor from the speaker terminal marked with "COM" to the 100V line in the amplifier terminal marked with "-",
"0", "COM".
Connect the other conductor, choosing between "HI" and "LO" depending on the desired power, to the 100V line in the
amplifier terminal marked with "100V", "+".
ARCHON
COM
CONSTANT IMPEDANCE CONNECTION
NOT ALLOWED on 100V lines.
Connect a conductor from the speaker terminal marked with "COM" to the amplifier terminal marked with "-".
Connect a conductor from the speaker terminal marked with "8 Ohm" to the amplifier terminal marked with "+".
ARCHON
COM
105
HI LO
NC NC 8Ω
105
NC NC 8Ω
ARCHON
50
105 / 106 / 108