Notes On Disconnecting From The Power Supply - Medion S89038 Mode D'emploi

3.2. Notes on disconnecting from
the power supply
• To disconnect the power supply from
your device, pull the mains adapter
from the socket outlet. Always pull on
the mains adapter/mains plug itself
when removing it from the socket. To
prevent damage, never pull on the ca-
ble.
• When not in use, pull the mains adapt-
er from the socket outlet, or use a mas-
ter-slave power strip to prevent power
consumption when switched off.
• Any sockets used for charging the bat-
tery must be close to the device and
easily accessible. Position the cables
so that they cannot be stepped on or
tripped over.
• Only operate the mains adapter on
earthed socket outlets with 230 V ~ 50
Hz. If you are not sure about the pow-
er supply at the set-up location, please
ask your power supplier.
324 of 524