Use - SOMFY SITUO 1 VARIATION Manuel D'installation Rapide

2

USE

Short press On
Short press –
Short press Off
3
PROGRAMMING YOUR REMOTE CONTROL
3.1 Programming on a Somfy remote-controlled socket
▶ Programming a remote control
1. Check that the remote-controlled socket is powered on.
During this operation, disconnect all other Somfy remote-controlled sockets in your home.
2. Press the channel selector button as many times as necessary until the indicator lights show the channel to
be programmed.
3.
Press the programming button on the remote-controlled socket until the indicator light flashes.
4.
Use a fine-tipped object to apply a short press on the PROG button on the back of the remote control.
The indicator light on the remote-controlled socket will come on continuously, and then go out.
2
4 EN - Installation and operating manual 1-channel - 5-channel variation remote controls - SOMFY
Lighting receiver
Socket
Light intensity variation
(with variation receiver)
3
OR
Example with Somfy remote-controlled socket
Roller shutter
Swing shutter
Blind
Venetian blinds
Open
• Stop if the shutter is moving
• Favourite position saved if the shutter
is open or closed
Close
Slats opening angle
variation (venetian blinds)
4