Publicité
Les langues disponibles
Les langues disponibles
customize massage
and backrest comfort
The massage-softening pad softens massage intensity and enhances backrest comfort. For a stronger
massage, remove the massage-softening pad. But keep it handy, in case you want to replace it in the future.
Open the pocket on the inside of the backrest pad, then remove the massage-softening pad.
Massage-softening pad
humantouch.com
intensity
Backrest pad
10
care and
maintenance
To keep your product working and looking its best, please follow
these simple care guidelines.
WARNING:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. When cleaning the controller or power switch, use a dry cloth only. Never use a damp cloth to clean the controller
or power switch.
3. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does
not fade prior to using the solution on the entire product surface.
4. Do not use benzene, thinner or any other solvents on your product.
Cleaning Code Standard: W
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush
vacuum extension. SofSuede
products can also be brushed with a suede brush. If your product becomes dirty, use a
®
water-based upholstery cleaner only. To treat stains, spot clean with an upholstery shampoo or a mild detergent foam.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication
or servicing is required.
2. Your chair should only be serviced by an authorized service center.
3. Replacement EasySleeves foot and claf massage well inserts are available from Human Touch, for an additional charge.
Use and Storage Environment:
1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that
the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame.
3. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
4. Do not use or store in extreme temperatures; product stored in cold temperatures may require 48 hours at room
temperature to function properly.
5. Product should be used and stored in an environment with non-condensing humidity ranging from 10 to 80%;
excessive humidity will damage the mechanics.
Specifications*
Operating Voltage:
AC110-120V 60 Hz
Power Consumption:
1.2A
Chair Size (reclined):
48" L x 28" W x 43" H
Product Weight:
145 Lbs.
Required Recline Clearance:
7"
Maximum Load Weight:
285 Lbs.
*Specifications are subject to change without prior notice.
11
Publicité
