Master Spas LEGACY WHIRLPOOL INT Enterprise SE Manuel De L'utilisateur page 52

Spa Controls
Flip (Invert Display)
NOTE:
Some panels may have a dedicated FLIP button, which allows the user to flip the display with a
single button-press.
Adjusting Filtration
MAIN FILTRATION
Filter cycles are set using a duration. Each setting can be adjusted in 1-hour increments. Filter Cycle
1 and Filter Cycle 2 (if enabled) are set to the same duration.
Main Screen
If Filter Cycle 2 is enabled, Filter 12 will appear in the LCD. If Filter is disabled, Filter 1 will appear.
PURGE CYCLES
In order to maintain sanitary conditions, secondary Pumps will purge water from their respective
plumbing by running briefly at the beginning of each filter cycle.
DO NOT DIVE.
Sets Filter length in hours
While the Temperature is
still flashing, press Light
repeatedly until FLTR
appears in the LCD.
Main Screen
To Set
*****
Waiting
Several Seconds
Reverts to Original Setting
50