Publicité
Les langues disponibles
Les langues disponibles
Peugeot 406
1995 - ....
Ref. 0498
Fitting instructions
1)
Remove the basic coating in the trunk. Detach rubbers of suspension and dismount the thermal panel
backwards.
2)
All the points of assembly (B) correspond with the holes laid down in the sides of the frame. Put the cage
nuts in the openings through the rectangular holes, being right in front of or behind.
3)
Cross in the edge of lower part, in the medium of the bumper, a part of 2,5cm out of 16cm.
4)
Assemble the tow bar with all the points (B) between the frame and on the cage nuts already put. (A)
comes on the screw-thread holes in the front of the back cross-piece. Screw the bolts.
5)
Assemble (*) and tighten everything firmly. Replace the thermal panel, the exhaust and the coating in the
trunk.
Composition
Tow bar reference 0498
1 ball T43M000
4 bolts M12x40
4 bolts M10x30
2 bolts M12x30
4 cage nuts M10 (big model)
2 washers 40x12x4
4 security washers M10
6 security washers M12
1 security shackle l
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*-*')
(*-*')
(B)
(A)
(B)
(A)
(B)
(A-*-*')
(*')
Publicité
