Disposal Of Packaging Materials; Inserting/Replacing The - SilverCrest SFM 4 A1 Mode D'emploi

Disposal of packaging materials

The packaging protects the device from damage during
shipment. The packaging materials have been selected
for their environmental friendliness and ease of disposal
and are therefore recyclable.
Returning the packaging to the materials
cycle conserves raw materials and reduces
the amount of waste that is generated.
Dispose of packaging materials which are no longer
needed in accordance with applicable local regulations.
Inserting/replacing the batteries
♦ Open the battery compartment
of the wireless mouse.
♦ Insert 2 x 1.5 V AA batteries into the battery com-
partment
one battery in the lower compartment and then the
second battery in the higher compartment. Ensure
that the plastic strip is positioned under the batteries,
this will make future battery exchanges easier.
♦ Close the battery compartment
CAUTION
► Always use batteries from the same manufacturer
and of the same type. Always replace both batter-
ies at the same time.
SFM 4 A1
(observe correct polarity). First place
on the underside
.
GB │ IE │ NI │
11 ■