Troubleshooting - SilverCrest SFM 4 A1 Mode D'emploi

♦ Select "Restore to default" to return the buttons to
their original functions.
The other tabs in this configuration menu contain settings
for the respective operating system.

Troubleshooting

If the wireless mouse is not recognised after installation
or does not respond to input, check the following:
♦ Check to ensure that the batteries have been inserted
the right way round.
♦ Check that the nano-USB receiver
connected to the computer.
♦ Try using a different USB port on your computer.
♦ Check the capacity of the batteries and if necessary
replace them.
♦ Note: you should use a mouse pad or similar if you
are using the wireless mouse on a glass surface or
any other reflective surface.
NOTE
► If the above-mentioned solutions do not resolve
the problem, please contact Customer Service
(see chapter Service).
│ GB │ IE │ NI
■ 16
is properly
SFM 4 A1