Creative MuVo V100 Mode D'emploi page 3

MuVo V100 _(PagerN)_Multi CLE.book Page 3 Friday, May 26, 2006 2:14 PM
5. When prompted, connect your player to your computer's USB port. Do not press the
buttons on your player while connecting it to your computer.
Step 2: Turn on player
Your player comes preloaded with some music to get you started immediately.
1. If your player is connected to your computer, make sure it is disconnected properly from
your computer. For more information, see "Disconnect player" on page 5.
2. Insert a AAA alkaline battery into your player.
1
3. Press and hold the Play/Pause
4. Connect your earphones and press the Volume
2
+
-
button until your player turns on.
3
+
(+)
+
( ) -
-
-
buttons to adjust the volume.
3