PNI ESCORT HP 72 Manuel Utilisateur page 6

1. Channel number or selected Standard
2. Selected modulation: AM or FM
3. Appears when the current channel is saved
in the scan list
4. The Roger Beep function is active
5. The priority (emergency) channel is active
6. The key lock function is active
7. Appears when you are on the menu
8. The radio receives a signal (RX)
9. Indicates the battery level
10. Show the selected output power (High or
Low)
11. Indicates the level of the received signal
and the strength of the transmitted signal
(TX)
Functions
Turn the radio on and off and
Volume control
Rotate the knob [12] clockwise to turn on the
radio. Continue to rotate right or left to adjust
the volume.
Rotate the knob [12] counter clockwise to turn
off the radio.
Note: Immediately after turning on the radio,
the current standard (eg EU) is displayed on the
screen. Then, the following information will be
displayed: channel, selected modulation, battery
level and active functions.
Channel selection
Press the key ▲ [8] or ▼ [5] to increase or
User manual 6