PNI ESCORT HP 72 Manuel Utilisateur page 10

AM/FM selection
According to the standard the radio is set
on, you can switch between AM and FM by
briefly pressing the A/F key [6]. The selected
modulation will be displayed on the screen.
Note: If the radio is set to a standard that does not
support AM, pressing the A/F key will not cause
any changes. The radio will remain on FM.
Setting the transmission power
(H/L)
Long press the H/L key [8] to switch between
H (high power) and L (low power). H or L will
appear on the screen.
FM: H = 4W/L = 1W
AM: H = 3W/L = 1W
Roger Beep
When this function is active, the radio will beep
at the end of the transmission (when the PTT
button is released).
Simultaneously press F [3] key and ▲ key to
activate Roger Beep function. On the screen
the icon will show up.
Press the two keys again to deactivate the
function.
Dual Watch
The Dual Watch function monitors the current
User manual 10