PNI ESCORT HP 72 Manuel Utilisateur page 8

Remove a channel from the scan list
First select the channel you want to remove
from the scan list using the keys ▲ [8] or ▼
[5].
Simultaneously pree the keys F [3] and A/F [6]
to remove the current channel from the scan
list. The icon will disappear from the screen.
Enable channel scan function
Long press the key A/F [6] to start scanning
the channels in the scan list. The icon
will flash on the screen. The radio will scan 5
channels per second.
When it receives signal, the radio stops the
scanning process and stays on the channel
with signal. When the signal disappears, the
radio waits for another 5 seconds after which
it resumes the channel scanning process. If
the PTT button is pressed or another signal is
received within 5 seconds, scanning does not
resume.
Long press the key A/F [6] to stop channel
scanning. The radio will return to the last
channel used before starting the scan.
Note: If the P [7] key is pressed during the scan,
scanning will stop and the radio will automatically
switch to priority (emergency) channels.
Priority channels (emergency)
Press the key P [7] to automatically switch to
User manual 8