Disposing Of The Batteries; Troubleshooting - Bissell CROSSWAVE 2593 Serie Mode D'emploi

Disposing of the Battery
Go to support.BISSELL.com for resources on battery disposal.
Before disposing the battery, make sure:
• The machine is disconnected from the 3-in-1 Docking Station.
• The Clean and Dirty Water Tanks are empty or removed from the machine.
• A Phillips-head screwdriver, electrical tape and rubber handled wire cutters are available for
disassembly.
1.
With a Phillips-head
screwdriver, remove the 4
screws on the back of the
machine. Lift off the back
cover.

Troubleshooting

For troubleshooting videos visit support.BISSELL.com.
This guide features everything you need to get ready for first use, including setting up, using and
maintaining your machine, but join us online for a comprehensive walkthrough. Our online support
includes tips and troubleshooting, videos, product registration, parts and more.
NOTICE
Disconnecting the battery will destroy the appliance and invalidate the warranty.
WARNING
and State regulations, removal and proper disposal of lithium-ion batteries is required. For removal of the
batteries in your appliance, see instructions on this page. For specific disposal instructions of batteries, please
contact the RBRC (Rechargeable Battery Recycling Corporation) at 1-800-822-8837 or visit www.Call2Recycle.org.
2.
Cut the yellow positive
(+) battery wire with wire
cutters. Wrap the end of the
cut wire with electrical tape.
Individually cut and wrap the
remaining battery wires.
This product contains lithium-ion rechargeable batteries. According to Federal
3.
Using a Phillips-head
screwdriver, remove the 4
screws located on the sides of
the battery pack and remove it
from the back cover.
BISSELL.com 11