Seiko V175 Instructions page 7

1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will
automatically reset the STOPWATCH hands to "0."
2. The 24-hour hand moves correspondingly with the hour hand.
3. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to adjust the STOPWATCH hand position if necessary.
4. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch designed so
that the date changes once in 24 hours.
5. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then
turn it back to the exact minute.
12
2. STOPWATCH HAND POSITION ADJUSTMENT
I If the STOPWATCH hands are not in the "0"
STOPWATCH 1/5-second hand
Unlock the crown and buttons.
A
B
STOPWATCH minute hand
CROWN
CROWN Screw all the way in until it is locked.
position, follow the procedure below to set
them to the "0" position.
A
Press for 2 seconds.
The STOPWATCH minute hand turns a full circle.
t
B Press repeatedly to set the STOPWATCH
minute hand to the "0" position.
The hand moves quickly if Button B is kept pressed.
t
A
Press for 2 seconds.
The STOPWATCH 1/5-second hand turns a full
circle.
t
Press repeatedly to set the STOPWATCH
B
1/5-second hand to the "0" position.
The hand moves quickly if Button B is kept pressed.
t
Push back into the normal position in
accordance with a time signal.
t
13