Kobalt 0332041 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Friday.
Safety Symbols
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols
and the explanations that accompany them deserve your careful attention and understanding. The
safety warnings DO NOT, by themselves, eliminate any danger. They are not substitutes for proper
accident-prevention measures.
DANGER: Someone will be seriously injured or killed if the safety information is not followed.
WARNING: Someone will be seriously injured or killed if the safety information is not followed.
CAUTION: Someone may be injured if the safety information is not followed.
User Safety
DANGER
Improper installation of the grounding plug will result in a risk of electric shock. If repair or
terminal. The grounding wire has a green outer surface.
WARNING
motor and pressure switch to produce sparks while operating. If sparks come into contact with
as far from the spray area as possible. Always operate the compressor in a well-ventilated area.
• Risk of electric shock. A licensed electrician must install all wiring in accordance with all local
and national codes. To avoid electric shock, never use an electric air compressor outdoors
when it is raining or on a wet surface.
• Risk of bursting. Rust can weaken the tank. Drain the condensed water from the tank after each
use to reduce rusting. Do not weld, drill or modify the air tank of this compressor. Welding or
condition. If a leak is detected in the tank, replace the tank immediately.
• Risk of injury. Always shut off the compressor, remove the plug from the outlet and bleed all
pressure from the system before servicing the compressor or when the compressor is not in use.
Do not use the unit with the shrouds removed. Contact with moving parts could cause serious
injury.
• Risk of bursting. Check the maximum pressure rating in the manual or the serial tag label.
Compressor outlet pressure must be regulated so as to never exceed the maximum pressure
rating. Relieve all pressure through the hose before removing or attaching accessories.
kobalttools.com
5

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

0470443

Table des Matières