Switching Off - Ortovox S1+ Mode D'emploi

INSTRUCTIONS
TRANSMITTING
S1+
Close the after the self-test has
successfully concluded. The trans-
mission monitoring lights (4) now
start flashing and the
SWITCHING ON
(device closed)
Turn the ON/OFF switch (1)
clockwise by 90° degrees.
When the S1+ is switched on when closed,
the battery status is given acoustically:
2 x HIGH = 100-50% battery capacity
1 x HIGH + 1 x LOW
1 x HIGH + 1 x LOW and LONG
Further important information about the battery can be found on p. 63
If the device self-test was not positively concluded,
a warning signal sounds.

SWITCHING OFF

PRESS IN
Lightly
and turn COUNTERCLOCKWISE
90° degrees.
S1+
transmits.
= less than 50% battery capacity
= less than 25% battery capacity
the ON/OFF switch (1)
by
S1+
1
4
OFF
ON
1
OFF
ON
EN 43