7
Adjustment of operating parameters
If you need to modify the operating parameters (force, speedness
etc..):
1. Scroll down the parameters until you visualize the desire pa-
rameter (i.g. P032);
2. Confirm by pressing on the
3. By pressing on
and
4. Confirm by pressing on the
eters previously selected).
For the complete list of the "Operating Parameters" See
the table on page. 66.
8
Programming complete
WARNING At the end of the programming procedure, use the buttons
operator is now ready again for new manoeuvres.
To perform any "Advanced Programming" operations (cancellation of the remotes, configuration inputs, etc. ..), see
on page 63.
key;
, set up the desired value;
key (display shows the param-
and
until the appearance of the symbol "----", the
55