Télécharger Imprimer la page

Kerbl SuperHeat Analog 14000 Mode D'emploi page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
7. Cleaning / maintenance
CAUTION!
Risk of physical injury and material damage if used incorrectly.
Disconnect the power cord and let the heater cool down before you begin cleaning.
The device must be cleaned after each use. The device should be placed in cold or warm water imme-
diately after use. This facilitates cleaning of the radiator. The radiator can be cleaned using a soft sponge cloth (do
not use
scrubbing brushes, wire brushes, wire wool or other abrasive cleaning tools) and lukewarm, soapy water. To clean
the handle and the immersion pipe, use a soft, damp cloth that must be completely free of solvents (acetone, petrol,
alcohol or similar).
8. Maintenance and repair
The device does not require maintenance, but should be thoroughly cleaned at regular intervals. In the event of a
fault, the device must be taken out of use immediately. If a repair is required, please contact a qualified electrician or
send the device for repair to the manufacturer. A faulty access line should also only be replaced by the manufacturer
or a qualified electrician. Only use genuine spare parts.
9. Technical data
Model:
Type:
Output:
Voltage:
Protection type:
Protection class:
Weight:
Height:
Heater diameter:
Min. immersion depth:
Max. immersion depth:
Temperature control range:
Subject to technical changes.
CE-/UKCA declaration of conformity
Albert Kerbl GmbH hereby declares that the product / device described in these instructions complies with
the fundamental requirements and other relevant stipulations and regulations. The CE-/UKCA mark confirms
compliance with the Directives of the European Union or the releant UK legislation.
Electrical waste
It is up to the operator to dispose of the device responsibly after its useful life in accordance with local regulations. Consult
the relevant regulations for your country. The device must not be disposed of in household waste. Under the terms of the EU
Directive on the disposal of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites
or recycling plants free of charge, or returned to dealers who offer a returns service. Correct disposal protects the environment
and prevents any possible harmful impacts on humans and the environment.
SuperHeat Analog
14000
2300 W
230 V
IPX7
I
3.8 kg
80 cm
16 cm
16 cm
70 cm
+10 °C to +90 °C
13

Publicité

loading