Kerbl SuperHeat Analog 14000 Mode D'emploi page 11

experience and knowledge if they are being supervised or have been trained on the safe use of the device and
understand the underlying hazards. Children should not use this device. Cleaning and maintenance performed by
the user should not be carried out by children.
• Do not operate the device near explosive substances or atmospheres at risk of explosion.
• Regularly check the device for leaks (seals, cable conduits and screw attachments). Neglecting this check
can result in significant danger.
• Defective access lines, housing parts or repairs may only be replaced or carried out by the manufacturer
or a qualified electrician.
• The device must not be operated via an external timer or a separate remote action system.
4. Setup of the device
The device consists of the following components:
1 Control unit with operatingelements and carrying handles
2 Connection cable
3 Immersion pipe
4 Radiator with external temperature probe
5 Cable holder
6 Thermostat
7 indicator light
8 Max.
9 Min.
7
6
9
8
11
2
5
1
3
4