Marmitek Anywhere 352 Guide Utilisateur page 5

Plug the power adapter in the electrical wall outlet and the Power LED (
soon as the transmitter is receiving the audio signal, it will automatically switch on and the
Signal LED ( ) will illuminate.
Speaker receivers
[6] Speaker on/off button
[7] Automatic frequency tuning button
[8] Volume button
[9] Battery cover
[10] Power connection
1. The speakers are dual power:
a. With batteries
Insert 6 pieces 'AA' size ALKALINE batteries (not included) into the battery compartment
with correct polarity. For using the batteries, make sure the Power adapter is not connected.
Note: Remove the batteries when they are empty or if you are not using the device for a
longer period.
b. With supplied power adapter
Connect the power adapter to the Power connection [10] on the rear of the speaker, then
plug it to the electrical wall outlet.
Note: batteries will not be charged by the speaker.
2. Turn on the speaker by pushing the
Speaker Anywhere 352™
"Tune"
"+ / - "
"DC IN"
button [6]. The blue signal LED now lights up.
) will light up. As
5