Marmitek Anywhere 352 Guide Utilisateur page 4

CONTENT
1x Audio Transmitter
2x Wireless Speakers
3x Power adapters
1x RCA to 3.5mm jack adapter
1x 3.5mm to 6.3mm jack adapter
1x User manual English, Deutsch, Français, Español, Italiano, Nederlands.
INSTALLATION
Transmitter
3
1. Antenna
2. Power indication LED (Red)
3. Signal indication LED (Green)
4. Channel switch
5. Power connection (DC IN)
1. Put the antenna tube over the antenna wire.
2. Plug the supplied AC power adapter in the Power connection (DC IN), located on the rear
of the transmitter.
3. The back of the transmitter has an audio cord that can be connected to audio output
(normally indicated with
player. To connect the transmitter to an audio source without 3.5mm jack Audio out, you
can use the supplied 6.3mm jack or RCA adapter.
4
1
2
4
or AUDIO OUT) of i.e. TV, PC, Radio, CD-/MP3-/MP4-/DVD
5
© MARMITEK