Kinedo AQUAFACTORY Utilisation Et Installation page 23

CLEANING AND MAINTENANCE
L
NOZZLES CLEANING
Clean all the nozzles with a sponge.
To keep the nozzles clean, swipe with one finger on them to ease the exit of possible impurities
which could clog them.
Do not use metallic objects (nails, pins, etc.) to clean the nozzle.
It could get damaged irreparably.
Do not try to disassemble the nozzles.
The jets may get damaged over time, replace them with those
supplied with the shower or contact the Technical Assistance Service.
M
CALIBRATION OF WATER TEMPERATURE
The thermostatic tap allows you to adjust the water temperature according to your needs and in
a stable manner.
It will no longer be necessary to make adjustments; simply place the thermostat once and for all
and you will always get the same water temperature.
To adjust the thermostatic mixing valve according to the desired water temperature, work as
described at page "64".
23
EN