Phocos CML05NL Guide De L'utilisateur page 35

Error Description
Error
LED is on
Loads are
not supplied
Battery is
empty after
a short time LED is on
Display Reason
Battery is low
(Red LED on)
Overcurrent/
Short circuit
of loads (Red
LED is
LED flashing)
flashing
Battery voltage
too high
(>15.5 / 31.0 V)
Battery wires
or battery fuse
LEDs are
damaged,
on
battery has
high resistance
Battery has
low capacity
(Red LED on)
Load will reconnect
as soon as battery is
Switch off all loads.
circuit. Controller
will switch on load
automatically after
Check if other sources
overcharge the battery.
If not, controller is
Check battery wires,
fuses and battery.
32
Remedy
recharged.
Remove short
max 1 minute.
damaged.
Change battery