Ecoflam KITMD-RWF50 Notice D'emploi page 13

RWF 50/55
- Microprocessor regulator - Configuration ConF - Analog input InP1
Configuration ConF
Here, the settings (e.g. acquisition of measured value
or type of controller) required directly for commissioning
a certain plant are made and, for this reason, there is
no need to change them frequently.
Analog input InP1.
An analog input is available.
420010571400
Basic display
Enter
>2 s
ESC
or timeout
Navigation principle
One level back One level down
ESC Enter
Next/previous parameter
Enter
User level OPr
SP1 or SP2 (editabile)
OPr
InP1 or (only display)
Enter
Parameter level
PArA
Heating controller
Cooling controller
Only RWF50.2:Pb1 dt rt db tt
Enter
Configuration level
ConF
Analog inputs:
Controller:
Thermal shock protection
Binary inputs:
Display:
Only RWF50.3
Controller outputs:
www.ecoflam-burners.com
EN
ConF
InP
Cntr
rAFC
binF
diSP
OutP
13