Télécharger Imprimer la page

Phocos MPS45 Guide De L'utilisateur page 37

Sélecteur modulaire

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Status indication
LED1(Yellow)
LED2(Green)
ON
ON
ON
ON
OFF
Safety Recommendations
Batteries store a large amount of energy. Under all circumstances, never short-circuit a battery.
We recommend connecting a fuse (slow acting type, according to the nominal regulator current)
directly to the battery terminal.
Batteries can produce flammable gases. Avoid making sparks, or using fire or any open flame
around the battery. Make sure that the battery room is ventilated.
Avoid touching or short circuiting wires or terminals. Be aware that the voltages on specific
terminals or wires can be as much as 95V. Use isolated tools, stand on dry ground, and keep
your hands dry.
Keep children away from batteries and the MPS unit.
Please observe the safety recommendations of the battery manufacturer. If in doubt, consult
your dealer or installer.
Liability Exclusion
The manufacturer shall not be liable for damages, especially on the battery, caused by use other
than as intended or as mentioned in this manual, or if the recommendations of the battery manufacturer
are neglected. The manufacturer shall not be liable if there has been service or repair carried out
by any unauthorized person, unusual use, incorrect installation, or poor system design.
Opening the case voids the warranty.
5
LED3(Red) Status
ON
OFF
OFF
OFF
FLASH
OFF
OFF
ON
ON
OFF
LED1
LED2
LED3
OK
Diversion load is switched on
OK
Diversion load is switched off
OK
Diversion load is in PWM mode
Diversion load current to high
ERROR
ERROR
Over-temperature
35
Meaning

Publicité

loading

Ce manuel est également adapté pour:

Mps80